In stock
Product
3242
PRESSURE SWITCH, 30PSI, 1/8" NPTF MALE, FOR PRO-LITE WARNING LIGHT
$34.93
Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns
Quick Specs
- Instructions: Download PDF
DESCRIPTION:
These high quality switches from AutoMeter can be paired with Pro-Lite warning lamps to supplement your instrumentation and improve driver visibility of critical conditions.
Feature Points
Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
- Closes at pressures 30psi and lower. Opens at 32 psi and higher.
- Measures 2" x 1"
- 0.250" Male Spade Terminal
Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
REVIEWS:
QUESTIONS:
can you give the correct pressure switch off a part # nc13770
PRESSURE SWITCH, 30PSI, 1/8" NPTF MALE, FOR PRO-LITE WARNING LIGHT
Product #3242
Date published: 2024-07-01
I see this is the more current single terminal version. But the Instructions with it are for the double terminal version. ??
If your sender has one terminal, it grounds through the threads. So supply 12 volt to your light, other light wire to the terminal on the sender.
Date published: 2024-01-22
Does this switch trigger the light at 30psi and higher, or 30 psi and lower? I am looking for a low oil pressure warning system.
This will trigger the warning light once the PSI is below 30.
Date published: 2023-06-12
hCORRECTION : the wiring for this two wire sensor doesn't use a ground wire. One terminal needs a hot wire, the other terminal sends power to the warning light. And your product image incorrectly shows a one terminal sensor. Come on autometer you ca
Hi Tim,
As referenced in the previous answer, we've had 2 wire senders in the past, but most are a single wire today. At least with AutoMeter, you definitely do not want to supply 12V to the sender in any circumstance. The sender always switches on ground or interrupts the ground side.
Thank you,
Matt
Date published: 2020-03-31
I NEED a 2 post version.
Hi Tim,
Thank you for the question. Many years ago and over the years, we offered 2 post pressure switches, but in recent years they changed to primarily a single terminal. If you required a 2 post, I'd recommend sourcing from another company unless you can find the older AutoMeter versions in the marketplace or secondary market.
Thank you,
Matt
Date published: 2020-03-31
does the new warning light warning switch have 2 wires or one. I have warning light 3240 and it has a 2 wire system
Lil Eck,
Thank you for the question. The warning light sensor will come with either a two or one spaded unit. If the sensor does come with only one spade then the sending unit is grounded through the threads. But if you have a two spade sensor like you described then one terminal is for ground and the other is for the signal wire.
Date published: 2020-03-29
What is the max system pressure this switch can handle? The system can go as high as 3,000 PSI.
Thank you for your inquiry. The 3242 is designed for a maximum of 120 psi. It is not designed to handle 3,000 psi, and will rupture if exposed to this type of pressure.
Date published: 2019-07-08
Bob here. We bought a 3242 switch, the bag says 3242, but the switch has 2 screw terminals on it and the number on the base is F42830. Did we get the correct part?
Thank you for your question. Yes, that is the correct part. If it has two terminals, one is for ground. If it only has one terminal then it grounds through the threads of the unit.
Date published: 2020-03-29
You may also like:
Also Purchased With
Check items to add to the cart or
