WARNING LIGHT, SILVER MINI PRO-LITE

Thank you for your question.Yes, you can use this on any of our tachs that have a shift light output.

Thank you for your question. This shift light requires it be connected to one of our tachs with a shift light output. It is not a standalone shift light.

Hi Erick, thank you so much for contacting us. We don't have direct experience connecting our shift light to an AEM system. Searching "aem infinity shift light" on Google lead me to this response: Make a general purpose low side out. Set your x and y axis up according to when you want your shift light to come on. You can do RPM for x axis and maybe gear for your y axis if you want the light to come on at different rpms depending on gear. You're going to run your desired low side out from the ecu to your light and power it with switched +12v. For the actual table configuration, you'll set the duty to 0 when you don't want the light on, and 100 when you want the light to switch on. You'd be best served contacting AEM directly if you've got questions about how to configure their system. Our shift light simply needs something to tell it when to turn on, commonly done through ground switching. Hope this helps!