Cart
In stock
Product
DL1010U

DASHCONTROL OBDII DISPLAY CONTROLLER, CHEVROLET CORVETTE, 2005-2013

$328.81
Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Quick Specs

DESCRIPTION:

AutoMeter’s remarkable DashControl™ utilizes your vehicle’s factory display(s) to provide performance information without modification. Available for certain vehicles with a Driver Information Center (DIC), DashControl™ plugs into the OBDII port and “hijacks” these displays, allowing you to monitor parameters from the vehicle’s data bus. Customize the display pages to display what you want, where you want it. Because there is no modification to any of the vehicle’s computer systems, it’s 100% warranty friendly and reversible simply by unplugging the device. It’s the easiest, most integrated solution for gauges yet, and takes only seconds to install.

DashControl™ offers customizable alerts as well. Water temp getting too hot or oil pressure dropping? DashControl™ can activate your factory warning chime and display an alert in the DIC at any value you set. Customization is incredibly easy using our intuitive configuration software. Better still, the system is expandable to add up to two additional analog inputs for parameters not monitored by your vehicle’s computer systems.

Download the DashControl Software HERE

Applications:
‘05-'13 Chevy Corvette

Displays:
DIC, HUD

Supported PIDs:
Engine Load (%)
Engine Coolant Temperature (ºF, ºC)
Short Term Fuel Trip Bank 1 (%)
Long Term Fuel Trip Bank 1 (%)
Short Term Fuel Trip Bank 2 (%)
Long Term Fuel Trip Bank 2 (%)
Manifold Absolute Pressure (PSI, kPa)
Engine RPM
Vehicle Speed (MPH, KPH)
Spark Timing (Deg.)
Intake Air Temperature (ºF, ºC)
Air Flow (g/s, lb/min)
Throttle Position (%)
Oxygen Sensor Voltage Bank 1 Sensor 1 (mV)
Oxygen Sensor Voltage Bank 1 Sensor 2 (mV)
Oxygen Sensor Voltage Bank 2 Sensor 1 (mV)
Oxygen Sensor Voltage Bank 2 Sensor 2 (mV)
Fuel Level (%)
Barometric Pressure (inHg, kPa)
Loop Status (0=Off, 1=Open Loop, 2=Closed Loop, 4=OL-Drive, 8=OL-Fault, 16=CL-Fault)
Fuel Alcohol Content (%) [Custom Tune PID]
Commanded Evap Purge (%)
Commanded Lambda
Ambient Air Temperature (ºF, ºC)
Knock Retard (Deg.)
Engine Oil Pressure (PSI, kPa)
Engine Oil Temperature (ºF, ºC)
Engine Oil Life Remaining (%)
Total Misfires
Injector Pulse Width Bank 1 (ms)
Injector Pulse Width Bank 1 (ms)
CMP Sensor RPM
CKP Sensor RPM
Delivered Torque Percent (%)
Torque Delivered (Ft/lb, Nm)
Fuel Trim Cel
Torque Management Spark Retard (Deg.)
Power Enrichment (0=Inactive, 1=Active)
Commanded Cooling Fan (%)
MAF Frequency (Hz)
Current Gear (Automatic Transmission Only)
Calculated Current Gear
Electronic Throttle Indicated Pedal Position (%)
Electronic Throttle Indicated Throttle Position (%)
Output Shaft Speed (RPM)
Transmission Fluid Temperature (ºF, ºC)
Right Front Position Sensor Voltage (V)
Left Front Position Sensor Voltage (V)\
Right Rear Position Sensor Voltage (V)
Left Rear Position Sensor Voltage (V)
Left Front Strut/Damper Damping Level (%)
Right Front Strut/Damper Damping Level (%)
Left Rear Strut/Damper Damping Level (%)
Right Rear Strut/Damper Damping Level (%)
Average Vehicle Speed (MPH, KPH)
Fuel Range (Mi, Km)
Average Fuel Economy (MPG, L/100km)
Instant Fuel Economy (MPG, L/100km)
Odometer (Mi, Km)
Trip Odometer A (Mi, Km)
Trip Odometer B (Mi, Km)
Washer Fluid Level Switch (0=Off, 1=On - fluid low)
Left Front Wheel Speed (MPH, KPH)
Right Front Wheel Speed (MPH, KPH)
Left Rear Wheel Speed (MPH, KPH)
Right Rear Wheel Speed (MPH, KPH)
Rough Road Detected (g)
Lateral Accelerometer Sensor Voltage (V)
Lateral Acceleration (g)
Yaw Rate Sensor Voltage (V)
Yaw Rate (Deg./S)
Steering Wheel Angle (Deg.)
Brakes On (0=Off, 1=On)
Left Front Tire Pressure (PSI, kPa)
Right Front Tire Pressure (PSI, kPa)
Left Rear Tire Pressure (PSI, kPa)
Right Rear Tire Pressure (PSI, kPa)
Calculated Boost (PSI, kPa)
Calculated Fuel Flow Rate (g/h, l/h)
Instantaneous Estimated Engine Power (HP, lb/ft)
Distance With AFM Active – Running Total This Trip (Mi, Km)
60ft Time (Sec)
330ft Time (Sec)
0-60 MPH (Sec)
0-100 KPH (Sec)
60-130 MPH (Sec)
100-200 KPH (Sec)
1/8 Mile Time (Sec)
1/8 Mile Elapsed Distance (Mi)
1/8 Mile Trap Speed (MPH)
1/4 Mile Time (Sec)
1/4 Mile Elapsed Distance (Mi)
1/4 Mile Trap Speed (MPH)
1/2 Mile Time (Sec)
1/2 Mile Elapsed Distance (Mi)
1/2 Mile Trap Speed (MPH)
1 Mile Time (Sec)
1 Mile Elapsed Distance (Mi)
1 Mile Trap Speed (MPH)

ZR1 Specific PIDs
Intake Air Temperature Sensor 2 (ºF, ºC)
Desired Fuel Rail Pressire (PSI, kPA)
Fuel Rail Pressure (PSI, kPa)
Fuel Pump Signal Command (%)
Fuel Pump Command (0=Off, 1=On)
ST Fuel Pump Trim
LT Fuel Pump Trim
Fuel Pump Speed (Hz)
FP Driver Output Duty Cycle (%)
FP Driver Input Duty Cycle (%)
FP Driver Input Frequency (Hz)
Fuel Pump Operating Status (0=Off, 1=On, 2=Error)
Fuel Pump Current (Amps)
Fuel Pump Driver Temp (ºF, ºC)

 

Feature Points
  • Take control of your vehicle instruments to unlock hidden performance info!
  • Display missing data your vehicle computer already knows - AFR, boost, temps, pressures, HP/TQ and more!
  • Your data, the way you want to see it - fully customize layouts with free DashControl software!
  • Improve on factory performance alerts by programming on screen text messages for alarm points and combine with a trigger to activate the vehicle's audible chimes for a fine tuned display that's specific to your driver displays.
  • Add up to two additional analog sensor inputs for those couple additional engine parameters you may want to see that are not readily available on the factory CANbus network.
  • Great alternative to add-on instruments and displays, that won't affect the vehicle's interior appearance (or attract thieves) while keeping the driver's line of sight clear and dash space open. Ideal for 'sleeper' projects and track days!
  • 100% warranty friendly - Completely reversible by simply unplugging the module from the vehicle.
  • Supported Display Control: DIC, HUD
Ships With
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

Videos:

REVIEWS:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 68.27ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

QUESTIONS:

website in pdf shows up as 404. What is the new website address?

Asked by: Jon G
I am not sure what the issue was that you encountered. Our website has always been the same. https://www.autometer.com/
Answered by: Jim from AutoMeter
Date published: 2024-02-28

Is there a way to have this display air/fuel ratio?

Asked by: Some Guy
This device monitors both banks pre and both banks post catalytic converter O2 sensors.
Answered by: Jim from AutoMeter
Date published: 2023-02-14

Hi there I was just wondering does this product work with a BMW 2019 1 series 125i on the gps flat screen.. have you made one to work thanks

Asked by: Mattblack125i
Sorry, there are no DashControl models designed for a BMW. Our DashLink, which uses an OBD-II device and broadcasts parameters onto a mobile device app, would be compatible with your BWM.
Answered by: Matt from AutoMeter
Date published: 2022-01-16

I HAVE A DASHCONTROL OBDII DISPLAY CONTROLLER FOR A 2015 CAMARO. WHEN PLUGGED IN AND I HAVE THE HUD OPTION TURNED OFF, MY HUD WILL CHANGE TO A DIFFERENT PAGE, CAR MENU NOT DASH LOGIC MENU, BUT REVERTS BACK TO THE PAGE THE DASH LOGIC INFO WOULD SHOW.

Asked by: DAVID62
Please send an email to [email protected] so we can see what others issues/fixes we can figure out for you.
Answered by: Sarah from AutoMeter
Date published: 2023-08-23

The DashControl configuration tool seems to have been removed from your site, is there anywhere I can download this tool?

Asked by: Tommy08
Thank you for your question. Please contact our Customer Service Team at 866-248-6356 and they will help find what you are looking for.
Answered by: Sarah from AutoMeter
Date published: 2021-09-14

Will this work on a 2019 corvette Grand Sport

Asked by: corvettecamaro
Thank you for your question. Unfortunately this will not work on a 2019. This will only work for 2014-2016.
Answered by: Steve from AutoMeter
Date published: 2020-03-16

Hi, will the factory alarms come through while using Dashcontrol?

Asked by: Antti
Thank you for your question. Yes, the factory alarms will still work with DashControl plugged in. It does not take away any features or functions, it only adds additional functions and parameters.
Answered by: Zach from AutoMeter
Date published: 2019-11-19

Do you make one for a 2007 trailblazer ss?

Asked by: Anonymous
Thank you for your question. Unfortunately, we do not have a Dash Control unit for a 2007 Trailblazer.
Answered by: Zach from AutoMeter
Date published: 2019-07-09
  • y_2024, m_7, d_3, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_DL1010U, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 91.21ms
  • QUESTIONS, PRODUCT